EN STRAP FOR BANDINGPACKINGQUALITYDIMENSIONSGRADESMECHANICAL PROPERTIESPHOTOFAQ
StandardStrap thickness, mmStrap width, mm
DIN EN 13246:20010,4; 0,5; 0,6; 0,7;
0,8; 0,9; 1,0
9,5; 12,7; 16; 19;
25,4; 31,75
DIN EN 13247:20010,79; 1,12; 1,2731,75

Steel strapping for packaging, fixing and transportation of cargoes as per DIN EN 13246:2001 and DIN EN 13247:2001

Price:от 0 rubles/per ton

Our company produces packaging steel strap for packaging, fixing and transportation of cargoes as per DIN EN 13246:2001 and DIN EN 13247:2001,which is used in EN countries. According to regulated European standards strap can be of galvanized or non-galvanized state, painted and waxed. This product is manufactured at the “high-strength packaging strap” shop.

* – The price is indicated only for small-scale wholesale and Ex-Works shipping( minimum value – 1 ton, loading characteristics are presented at “Packing” tab). Express shipping of packaging strap is possible only for positions presented at “In stock” tab. The price for strap shipped with carload and FTL norms is adjusted individually.

Our partners:

партнеры -труба стальная

Packing methods
Упаковка ленты ГОСТ

Packing of finished products is carried out in accordance with the requirements of GOST 3560-73, GOST 503-81 and other normative documents as well as the schemes agreed with the customer on. Each coil is obligatory to be banded at least in three positions through an inner coil diameter. Packing of coils can be done both on vertical and horizontal axis.

Strap of ribbon winding is placed on a wooden pallet. Strip coils are put together in piles with or without wooden fillers between.

Packaging material

Coils are put together in piles, placed on wooden pallets, banded by steel strapping and wrapped in paper as well as film tape.

On customer’s request lower coil may be wrapped in polypropylene film or paper.

Integrated Management System

лента оцинкованная, лента стальная оцинкованнаяThe company has developed and implemented an integrated management system (IMS), confirmed by the compliance certificate. The certificate confirms that cold-rolled steel strapping as per DIN EN 13246:2001 and DIN EN 13247:2001 is produced in accordance with the requirements of GOST ISO 9001-2011 (ISO 9001:2008), GOST R 54934-2012 (OHSAS 18001:2007), GOST (ISO 14001:2004).

Testing methods

Minimum yield tensile strength and elongation of steel strapping are regulated by EN 10002-1 and tested on samples of 100mm length.
Сamber, bending and curling tests of the strap DIN EN 13246:2001 and DIN EN 13247:2001 are carried out on samples of 2000mm (see pict.). Camber deviation(2) must not be more than 10mm(1). Strap end must not rise higher than 40mm(4) while bending(3). Strap curling(5) can not exceed 30°(6).

испытания ленты по евронормам

Strap edges shall have no burrs and grooves.

Packaging strap as per DIN EN 13246:2001 is produced of 6 types, each of the following sizes:

Strap typeMaterialStrap width, mmStrap thickness, mm
1. Cold-rolled steel9,50,4; 0,5; 0,6; 0,7;
0,8; 0,9; 1,0
12,70,4; 0,5; 0,6
160,4; 0,5; 0,6
190,5; 0,6; 0,7;
0,8; 0,9
25,40,6; 0,8; 0,9; 1,0
31,750,8; 0,9; 1,0
2.1. Cold-rolled steel heat-treated and tempered9,50,4; 0,5
12,70,4; 0,5; 0,6
160,4; 0,5; 0,6
190,5; 0,6; 0,7;
0,8; 0,9
25,40,6; 0,8; 0,9; 1,0
31,750,8; 0,9; 1,0
2.2. Cold-rolled steel heat-treated and tempered9,50,4; 0,5
12,70,4; 0,5; 0,6
160,5
190,6; 0,8
25,40,8
31,750,8
3.1.Cold-rolled steel heat-treated 190,5; 0,6; 0,8; 0,9
25,40,8; 0,9
31,750,8
3.2. Cold-rolled steel heat-treated12,70,5
160,5; 0,6
190,5; 0,6; 0,7;
0,8; 0,9
25,40,8
31,750,8
3.3.Cold-rolled steel heat-treated160,5; 0,6
190,6; 0,7;
0,8; 0,9

Steel strap as per DIN EN 13247:2001 is produced of 31,75mm width and 0,9; 1,12 and 1,27 mm thickness.

Steel grades are not regulated.

Steel strap as per DIN EN 13246:2001 is produced from cold-rolled steel without any treatment(type 1), heat-treated and tempered(type 2.1 and 2.2) and heat-treated(type 3.1,3.2 and 3.3).

Mechanical properties of packaging steel strap DIN EN 13246:2001:

Strap typePropertiesStrap width, mmStrap thickness, mmMin. tensile strength, N/mm2Min. elongation, %
1. Low tensile strength9,5 - 190,4; 0,5; 0,6650-
19 - 31,750,7; 0,8; 0,9; 1,0600-
2.1. Average tensile strength – standard quality9,5 - 190,47500,5
9,5 - 190,5; 0,67501
190,77001
19 - 31,750,8; 0,9; 1,07002
2.2.High tensile strength – low percentage of elongation9,5 - 31,750,4; 0,5; 0,6; 0,7;
0,8
9000,5
3.1.High bending properties – very high percentage of elongation19 - 31,750,5; 0,6;
0,8; 0,9; 1,0
75012
3.2.High tensile strength – high percentage of elongation12,7 - 31,750,5; 0,6; 0,7;
0,8; 0,9
9256
3.3. High tensile strength16 - 190,5; 0,6; 0,7;
0,8; 0,9
12503

Mechanical properties of packaging steel strap DIN EN 13247:2001:

DimensionsMin. breaking load, kNPercentage of elongation L=100, %, min.
31,75 х 0,79257
31,75 х 1,12387
31,75 х 1,27437
Упаковочная лента предназначена для обвязки, упаковки, пакетирования, крепления продукции, соединения в моноблоки отдельных товарных единиц с целью исключения повреждения и порчи товара при доставке потребителю. Наиболее распространенные виды упаковочных лент – полиэстеровая (лента ПЭТ), полипропиленовая (П/П лента) и лента упаковочная металлическая. Железная упаковочная лента обеспечивает повышенные прочностные характеристики и незаменима при перевозке крупногабаритных грузов. Цена и качество стальной ленты зависит от требований, предъявляемых к временному сопротивлению разрыву и степени защиты от коррозии. Наибольшее распространение на рынке получила лента упаковочная оцинкованная.

Лента стальная упаковочная предназначена для обвязки, для поддонов, упаковки, пакетирования, крепления крупногабаритной продукции, соединения в моноблоки отдельных единиц с целью исключения повреждения и порчи товара при доставке потребителю. Лента упаковочная гост 3560-73 подходит для автоматической и ручной упаковки, используется в ме­таллургической, деревообрабатывающей и других отраслях промышленности.

Other types of products: